1. Press # key

2. Press 9 key for Misc. Options

3. Press 1 key for Semi integrated.

4. Press 1 key or select “Enable Semi Integ”

5. Press “on” Key

6. Press 2 key or select “Communication type”

7. Press 3 key or select “Ethernet”

8. Press 1 key if the enter terminal port did not show

9. Press green button

10. Press 3 key or select “Receipt options”

11. Press 1 key or select “ECR”

12. Press Red button to go back.

13. Wait for “Welcome” to show

14. Press # key

15. Press 3 Key or select "Set up Menu"

16. Press 2 key or select "Communications"

17. Press 3 key or select "Ethernet"

18. Press 2 key or select "Ethernet Set up"

19. Press 2 key or select "Static IP"

20. Press 1 key or Select "Terminal IP", Enter Static IP Address.

21. Press Green button

22. Press 2 key or select "Gateway IP" and Enter Gateway IP address

23. Press Green Button

24. Press 3 key or select "IP Submask" and enter IP Submask address

25. Press Green Button

26. Press 4 key or select "Pri DNSIP" and enter Primary DNS address.

27. Press Green Button

28. Press 5 or select Secondary DNS and enter the address

29. Press green button and hit "Red key to go back to Welcome sign"